Cheap and Brand New 5.5 inch M9 HUD Head Up Display

Other-Auto-Replacement-Parts p_GS216317101

The Cheapest Other-Auto-Replacement-Parts p_GS216317101_9,35% off - Online Store
30 day money back

  • Availability: IN STOCK
  • Brand :
  • Other Auto Replacement Parts
  • Item Code:
  • p_GS216317101
  • Condition :
  • Electronic
    (Brand new)
  • start rate
  • SRP Price : NZ $ 93
  • Your Price : NZ $60
" nz battery store

Hot Selling - Compared with the product

microsoft surface

5.5 inch M9 HUD Head Up Display

Description:
HUD short for the head up display. It displays driving data on the front windshield such as speed, rpm, fuel consumption, water temperature, voltage; Do not take your sight away from the road while you are driving. This Dash speed display will let you keep your eyes on the road while looking at your speed or other figures! Drivers can read the driving information instantly, and can always keep the best state on the way with HUD

Main Features:
- Available for cars with OBD2 and EU OBD port ( car automatic diagnosis system ), plug and play
- Screen 5.5 inch HD display
- Multi-color design makes the screen more abundant and easier to read
- Nano-technology to eliminate double reflections, more clearer
- Driving distance measurement
- Rich contents: speed, rpm, water temperature, voltage, instantaneous fuel consumption, average fuel consumption, driving distance measurement, shift reminders, fatigue driving reminders, low voltage alarm, high water temperature alarm, over speed alarm, engine failure alarm, eliminate the fault code, freely switch between kilometers and miles
- Auto power on / off: HUD starts and off with vehicle started and shutdown, effective protection of the car battery, retaining the manual switch mode, more easier to control HUD
- Automatic and manual brightness adjustment mode, driving without glare

HUD Key Function:
- Buzzer Icon:
Pull down: pull down the wave button 5 seconds to turn off the buzzer, another 5 seconds to turn on the buzzer
- Clearing Engine Fault Codes:
Pull up the wave button 5 seconds to clear the engine fault code when HUD in normal state
- Reset Setting:
Long press in for 5 seconds to enter into the setting menu, short press in for 14 times to find menu 14, adjust the default value from 0 to 1, then press in for 5 seconds to keep and exit

HUD Installation:
1. Know your vehicle brand, HUD work for cars with OBD2 agreement or EU OBD agreement. Open the engine hood and find the sticker below it, if it has words like OBDII CERTIFIED, then it can be installed
2. Find out the 16 pins diagnostic link of the vehicle and connect it well with OBDII connecting line

HUD Settings:
Car speedometer value has been adjusted high by car factory to make driving safe. Since HUD receiving data from ECU, thus HUD display is the accurate value. ECU calculated data will be a little different with car dashboard data. If you find HUD display value is not same as your dashboard, you can enter the menu setting to adjust HUD value, then HUD display information will be the same as your dashboard

Use and Installation for Reflection Film:
- First, please put the non-slip mat on the dashboard, and then put HUD on it. Reflection film can be stick to the position right above the HUD position which can reflect host screen to windscreen
- Please note: HUD projects dashboard information on the car front windscreen, because the windscreen is double, which will make a double reflection on the windscreen when it works. The double reflection will be different because of the different windscreen. If you can see the display information clearly, then there is no need to use the reflection film. If there is a double image, then please use the reflection film

Methods of Pasting the Film:
1. Spray some water on the place that the film will be pasted on, and then use a dry cloth to clean it
2. Take off the back side ( marked 1 ) of reflection film, then paste it to the window glass
3. After you have adjusted the location, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it
4. Take off the protection film ( marked 2 ) of the reflection film. If the film cannot display the whole information, please adjust the non-slip mat to move the position

Technical Parameters:
- Environment temperature: -40 Deg.C - 80 Deg.C
- Atmospheric pressure: 86 - 106KPa
- Relative humidity: 10 percent - 95 percent
- Environmental noise: less than 60dB
- Alarm sound level: about 30dB
- Working voltage: 9V - 16V
0.298
Package weight: 0.338 kg
Product Size(L x W x H): 13.00 x 7.50 x 1.50 cm / 5.12 x 2.95 x 0.59 inches
Package Size(L x W x H): 17.00 x 13.00 x 5.00 cm / 6.69 x 5.12 x 1.97 inches
Package Contents: 1 x HUD Head Up Display, 1 x HD Reflection Film, 1 x Reflection Panel, 1 x OBDII Cable, 1 x Non-slip Mat, 1 x English User Manual
M9 5.5 inch HD Screen HUD Head Up Display
M9 5.5 inch HD Screen HUD Head Up Display
M9 5.5 inch HD Screen HUD Head Up Display
M9 5.5 inch HD Screen HUD Head Up Display
M9 5.5 inch HD Screen HUD Head Up Display
M9 5.5 inch HD Screen HUD Head Up Display
M9 5.5 inch HD Screen HUD Head Up Display

These may be you want to look for

The latest product information, please visit our blog
safe shopping